CBE PC260-ST
Official technical documentation and workshop diagnostics for PC260-ST.
Master Troubleshooting & Diagnostics Matrix
| Error Code / Indicator | Symptom / Meaning | Step-by-Step DIY Fix | Suggested Actions |
|---|---|---|---|
Symbol 3 blinking | Car battery alarm Possible Cause: Car battery voltage gets under 12V | Alarm goes off when the voltage gets over 12.5V. | DIY Safe |
Operational Fault | Leisure battery discharge alarm Possible Cause: Leisure battery voltage gets 10.5V | Alarms go off when the voltage gets over 12.5V. | DIY Safe |
Operational Fault | Leisure battery reserve alarm Possible Cause: Leisure battery voltage gets 11.5V | Alarms are disactivated with voltage superior to 12.5V. | DIY Safe |
Symbol 12 | Minimum voltage control (battery protection) activated Possible Cause: Electronic battery protection device cuts off 12V users when leisure battery reaches 10V | It is possible to reactivate all users for one minute by pressing the on/off button on control panel. Users are automatically reactivated when voltage is bigger than 13.5V. Control panel automatically turns off with a voltage lower than 9.5V. | DIY Safe |
Operational Fault | Fresh water tank alarm Possible Cause: Fresh water level is lower than 10% of the tank capacity | Alarm automatically turns off when level exceeds 20%. | DIY Safe |