Dometic AP Remote Control
Official technical documentation and workshop diagnostics for Dometic AP Remote Control.
Technical Specifications
ElectricalSupply voltage: 2 V … 3.5 V (2 AAA batteries, 1.5 V). Radio frequency: 433 MHz. Transmitting power: 10 mW.
Gas Or PressureNot applicable
Capacities DimensionsWeight (including batteries): 80 g. Storage temperature: –25 °C … 75 °C. Operating temperature: –20 °C … 65 °C. Humidity: ≤ 90%.
Master Troubleshooting & Diagnostics Matrix
| Error Code / Indicator | Symptom / Meaning | Step-by-Step DIY Fix | Suggested Actions |
|---|---|---|---|
N/A | Blind does not respond to the AP remote control (No power) Possible Cause: Battery drained or power supply issue to the blind | Check battery and check power to the blind. | DIY Safe |
N/A | Blind does not respond to the AP remote control (Wrong channel) Possible Cause: Incorrect channel number selected | Check channel number. | DIY Safe |
N/A | Blind does not respond to the AP remote control (Thermal cut-out) Possible Cause: Repeated or prolonged use caused thermal cut-out to activate | Wait 20 min for the motor to re-activate. | DIY Safe |
N/A | Blind does not respond to the AP remote control (Pairing issue) Possible Cause: Wrong or lost pairing | Re-pair AP remote control to the blind. | DIY Safe |
N/A | Blind moves in the wrong direction Possible Cause: Wrong setting | Change direction of blind. | DIY Safe |
N/A | More than one blind moves Possible Cause: Multiple blinds paired to each channel or set to channel P | Change channels to control other blinds or un-pair unwanted motors from the AP remote control. | DIY Safe |
N/A | Display does not show the channel number Possible Cause: No power | Check battery. | DIY Safe |
N/A | AP remote control does not behave as expected Possible Cause: Programming timeout | Note that the system will automatically switch out of programming mode if no buttons are pressed after 30 s. Do not leave big delays between programming steps. | DIY Safe |