Dometic ASC Series
Official technical documentation and workshop diagnostics for ASC Series.
Technical Specifications
Master Troubleshooting & Diagnostics Matrix
| Error Code / Indicator | Symptom / Meaning | Step-by-Step DIY Fix | Suggested Actions |
|---|---|---|---|
N/A | Logic board error or uninitialized software Possible Cause: Replaced logic board without pre-flashed software or corrupted flash memory card | Order logic board with software or request flash memory card replacement (note: required for units since SN 310000 on request) | DIY Safe |
Frequently Asked Questions
Q: MY ROOFTOP UNIT HAS THE ELECTRIC HEAT STRIP OPTION (NON-HEAT PUMP ELECTRIC HEAT OPTION), BUT WHEN IT GETS COLDER OUTSIDE IT DOESN’T SEEM TO MAINTAIN THE TEMPERATURE. WHAT SHOULD I DO?
Electric heat strips are designed to take the chill out of the air inside your motorhome, but they are not intended to be the primary heat source for cold weather camping. When outdoor temperatures drop significantly, the heat loss of the motorhome typically exceeds the capacity of a standard electric heat strip.
Q: WHAT ARE THE BENEFITS OF A MOTORHOME AIR CONDITIONER?
An motorhome air conditioner helps maintain a comfortable indoor climate, reduces humidity levels inside the vehicle, and filters out dust and pollen, creating a more pleasant and healthy living space while traveling or camping.
Q: WHAT IS THE IDEAL AIR CONDITIONING TEMPERATURE?
The ideal indoor air conditioning temperature for an motorhome is generally between 70°F and 72°F (21°C to 22°C), balancing comfort and energy efficiency.
Q: WHAT MOTORHOME AC DO I NEED IN WARM LOCATIONS?
For extremely warm locations or larger motorhomes, a high-capacity rooftop air conditioner (such as a 13,500 BTU or 15,000 BTU unit) or a dual AC setup is recommended to adequately cool the space.
Q: HOW DOES MOTORHOME AIR CONDITIONING WORK?
Motorhome air conditioning works on the same principle as a standard home AC unit. It uses a refrigeration cycle involving a compressor, condenser, expansion valve, and evaporator to absorb heat from the interior air and exhaust it outside, while blowing cooled air back into the motorhome.
Q: HOW TO RUN MY MOTORHOME AC WITH A GENERATOR?
To run your motorhome air conditioner with a generator, ensure the generator has sufficient running and starting wattage (surge wattage) to handle the compressor's startup load—typically a minimum of 2,000 to 3,000 watts depending on the AC unit size. Always start the generator and let it stabilize before turning on the air conditioner.
Q: HOW TO RUN MY MOTORHOME AIR CONDITIONER ON THE CAMPSITE?
To run your motorhome air conditioner at a campsite, connect your motorhome to an appropriate power pedestal (usually 30-amp or 50-amp service) matching your motorhomes electrical system requirements. Ensure other high-draw appliances are managed to avoid tripping the campsite breaker.