Dometic Club AIR Pro
Official technical documentation and workshop diagnostics for Club AIR Pro.
Technical Specifications
Gas Or PressureInflate air poles only to the green zone of the hand pump pressure gauge (9 PSI / 0.62 bar). Do not use car tire compressors.
Capacities DimensionsConnection height: 1800-2100 mm. Gross weight (box 1 and 2): 32.2 kg & 12.1 kg. Minimum weight: 24.6 kg.
Master Troubleshooting & Diagnostics Matrix
| Error Code / Indicator | Symptom / Meaning | Step-by-Step DIY Fix | Suggested Actions |
|---|---|---|---|
N/A | Awning tent only inflates with difficulties Possible Cause: Valve not fully screwed into air pole or inflation tube twisted at the valve | Check that valve is fully screwed in. Untwist inflation tube. Check hand pump function. | DIY Safe |
N/A | Part of the awning tent does not inflate or deflate Possible Cause: Isolation valves connecting air poles are closed | Check that all isolation valves connecting the air poles are open. | DIY Safe |
N/A | Air poles are kinked Possible Cause: Under-inflation | Add more air up to 9 PSI / 0.62 bar. | DIY Safe |
N/A | Air leak Possible Cause: Loose valve, missing ring seal, loose valve cap, or puncture | Check valve is fully screwed in with ring seal in place. Ensure cap is tight. Locate puncture and repair using repair tape and solution. | DIY Safe |
N/A | Water leak Possible Cause: Leaky seams, damaged tapings, or internal condensation | Check for leaky seams or moist areas; apply seam sealant. If no leaks found, increase ventilation to combat condensation. | DIY Safe |
N/A | Rip in the fabric Possible Cause: Physical damage or wear | Use repair tape to seal the fabric. Have repairs carried out by an authorized specialist. | DIY Check / Tech Fallback |