Dometic FanTastic Vent
Official technical documentation and workshop diagnostics for FanTastic Vent.
Technical Specifications
ElectricalOperating Voltage: 12 V DC; Max power consumption: 30 W (Model 7350), 36 W (Models 2250, 3300, 3350, 6350, 7300); Fuse: 4 A glass fuse; Remote control batteries: 2x AA
Gas Or PressureNot applicable
Capacities DimensionsRoof thickness compatibility: Standard for 25 mm and above (spacers required for roofs thinner than 25 mm); Dimensions (W x D x H): 471 x 471 x 190 mm; Weight: 5 kg; Maximum travel speed with closed cover hood: 150 km/h; Noise level: < 40 dB(A); Temperature setting range: 60 – 90 °F / 15 – 33 °C (Thermostat switch range: 22 – 123 °F / -5.5 – 50.5 °C)
Master Troubleshooting & Diagnostics Matrix
| Error Code / Indicator | Symptom / Meaning | Step-by-Step DIY Fix | Suggested Actions |
|---|---|---|---|
N/A | Fan control does not respond or emit a single beep to remote commands Possible Cause: Command not received by the fan control, remote in standby mode, or depleted batteries | Press any button on the remote to wake it from standby mode, check/replace the 2 AA batteries, or ensure line-of-sight and proximity to the unit. | DIY Safe |
N/A | Fan motor does not start when switched on Possible Cause: Cover hood is not sufficiently open (safety switch active), blown fuse, or 12 V power supply interrupted | Ensure the cover hood is fully open (or opened at least 5 cm / 2 inches for thermostat/automatic operation, or 10 cm for model 2250). Check and replace the 4 A fuse located behind the black cap. Verify 12 V DC power supply. | DIY Safe |
N/A | Cover hood is stuck and will not open Possible Cause: Seal has dried up due to warm weather causing the cover hood to stick | Open the cover hood completely, clean the underside of the hood and seal with methylated spirits or solvent, apply water-based protective agent (e.g. 303 Protectant), let dry, polish with a soft cloth, and apply an even layer of silicone to the seal. Replace seal if damaged. | DIY Safe |