Dometic Santorini / Reunion / Pico
Official technical documentation and workshop diagnostics for Santorini / Reunion / Pico.
Technical Specifications
Gas Or PressureMax mattress inflation pressure: 2 psi / 0.14 bar. Air poles inflation pressure: 10 psi / 0.69 bar (green zone on hand pump pressure gauge).
Capacities DimensionsSantorini FTK 4X8: 80 x 46 x 44 cm, 31.75 kg. Santorini FTK 2X4: 75 x 43 x 40 cm, 24.9 kg. Reunion FTG 5X5: 70 x 30 x 30 cm, 14.22 kg. Reunion FTG 4X4: 60 x 30 x 30 cm, 12.52 kg. Pico FTC 2X2 TC-i: 68 x 29 x 29 cm, 10.98 kg. Pico FTC 1X1 TC-i: 65 x 28 x 28 cm, 9.34 kg.
Master Troubleshooting & Diagnostics Matrix
| Error Code / Indicator | Symptom / Meaning | Step-by-Step DIY Fix | Suggested Actions |
|---|---|---|---|
N/A | Tent only inflates with difficulties Possible Cause: Valve not fully screwed into air pole or inflation tube is twisted at the valve. | Check that the valve is fully screwed into the air pole and untwist the inflation tube. | DIY Safe |
N/A | Air leak Possible Cause: Valve loose, ring seal missing/misaligned, loose valve cap, or puncture. | Check that valve is fully screwed in with ring seal in place, ensure valve cap is tight, or locate and repair punctures using repair tape and solution. | DIY Safe |
N/A | Water leak Possible Cause: Leaky seams, damaged tapings, moist areas, or internal condensation. | Apply seam sealant if leaks found; increase ventilation and use waterproof groundsheet if caused by condensation. | DIY Safe |
N/A | Rip in the fabric Possible Cause: Physical damage or wear and tear. | Use repair tape to seal the fabric or have repairs carried out by an authorized specialist. | DIY Check / Tech Fallback |