Truma Electric Fireplace Cover
This electric fireplace cover optically and acoustically simulates a burning fireplace when operated exclusively with compatible Truma space heaters. It features remote-controlled flame simulation, adjustable crackling sounds, and brightness settings operating on a 12V SELV power supply.
Technical Specifications
Power Consumption 12v12 W (quiescent current < 1 mA)
Weight Kgapprox. 2.8 kg
Master Troubleshooting & Diagnostics Matrix
| Error Code / Indicator | Symptom / Meaning | Step-by-Step DIY Fix | Suggested Actions |
|---|---|---|---|
Operational Fault | Flame intensity is too low or turned down. | Increase the intensity. | DIY Safe |
Operational Fault | Volume is set too low. | Increase the volume. | DIY Safe |
Operational Fault | Remote control is not properly aligned with the IR receiver. | Point the remote control at the IR receiver when issuing commands. | DIY Safe |
Operational Fault | Battery issue in the remote control. | Check that the remote control batteries are in perfect condition! | DIY Safe |
Fireplace does not work. | Power supply, fuse, battery charge, or system lockup issue. | Check the power supply and proper plug connection. Check the fuse in the vehicle electrical system / power cable. Check that the supply battery is in good condition and fully charged. Perform a reset by disconnecting the power supply for at least 20 seconds. | DIY Safe |
Frequently Asked Questions
Q: Which heaters can this fireplace cover be used with?
It is exclusively approved for operation with Truma S 5004 / S 5004 E (NL) heaters.
Q: What batteries are required for the remote control?
Use exclusively leak-proof micro batteries of type LR 3, AM4, AAA, MN 2400 (1.5 V).
Q: How do I perform a manual switch-on or factory reset directly on the cover?
Press the button on the underside of the cover for approx. 1 second to turn on the fireplace with the last saved settings, and press for approx. 3 seconds to restore the fireplace to its original factory settings.