Truma Gas Remote Switch (GSE / GS 8 / GS 10)
Solenoid-driven remote isolation valve system to cut off gas supply from inside the living area.
Technical Specifications
Gas Pressure Mbar150 mbar max. pressure
Power Consumption 12v40 mA (brief opening: 2 A)
Master Troubleshooting & Diagnostics Matrix
| Error Code / Indicator | Symptom / Meaning | Step-by-Step DIY Fix | Suggested Actions |
|---|---|---|---|
Operational Fault | No electrical supply or internal safety lock active. | Check the main panel 12V caravan supply switch and inspect inline valve connection wiring. | DIY Safe |
Frequently Asked Questions
Q: What happens to the gas remote switch in the event of a power failure?
In the event of a power failure, the solenoid valve in the Truma gas remote switch closes. After the power supply is restored, the solenoid valve opens automatically again.
Q: Can the gas remote switch be used to prevent gas escape during an accident according to UN-ECE regulation 122?
No, the gas remote switch must not be used as a device according to UN-ECE regulation 122 to prevent the uncontrolled escape of liquefied gas in the event of an accident.
Q: Should gas cylinders be kept open during system use?
Yes, the gas cylinders remain open during the use of the installation. If the gas supply is not used for a long time, the gas cylinders should be closed.