Truma GasCheck
Official technical documentation and workshop diagnostics for Industrial GasCheck.
Technical Specifications
Operating Voltage9V DC
Gas Or PressurePropane / Butane LPG
Dimensions Cutout138 x 35 x 30 mm
Master Troubleshooting & Diagnostics Matrix
| Error Code / Indicator | Symptom / Meaning | Step-by-Step DIY Fix | Suggested Actions |
|---|---|---|---|
N/A | Incorrect measurement Possible Cause: Dirty measuring head, dust particles from aluminium cylinders, dirty or rusty gas cylinders, invisible patches of rust inside the cylinder, very thick paint, stickers, condensation, or dented/scratched gas cylinders. | Clean the measuring head with a damp cloth, clean the gas cylinder at the measuring point, or measure at a different place on the cylinder. | DIY Safe |
N/A | LED flashes red or green with low voltage warning (measurement still possible) Possible Cause: Battery is low. | Replace the battery with a new E block 9V (Type 6 LR 61, 6 F 22) battery, ensuring correct polarity. | DIY Safe |
N/A | Red status LED flashes and the appliance beeps 3 times (no measurement possible) Possible Cause: Battery is flat. | Replace the flat battery with a new E block 9V (Type 6 LR 61, 6 F 22) battery, ensuring correct polarity. | DIY Safe |