Truma iNet X Connect
The Truma iNet X Connect enables remote control and monitoring of the compatible Truma panel and connected appliances via the Internet. It establishes mobile network connections between the panel, mobile devices running the Truma iNet X App, and the Truma iNet X Cloud.
Technical Specifications
Power Consumption 12v70 mA (average), 0.9 W power consumption
Weight Kgca. 260 g
Master Troubleshooting & Diagnostics Matrix
| Error Code / Indicator | Symptom / Meaning | Step-by-Step DIY Fix | Suggested Actions |
|---|---|---|---|
LED button lights red | An error has occurred and is displayed on the panel and in the app. | Follow the solutions suggested on the panel display or in the app, then acknowledge the error via the panel or app. | DIY Safe |
Operational Fault | Loss of power supply or connection issue. | Check 12 V DC power supply and inspect vehicle fuses for the power supply, replacing if necessary. | DIY Safe |
Connect does not respond | The unit may have frozen or experienced a temporary fault. | Press the LED button for 5 seconds to restart, or unplug the cable plug from the Connect, wait a few seconds, and plug it back in. | DIY Safe |
Frequently Asked Questions
Q: How do I restart the Truma iNet X Connect?
You can restart it by pressing the LED button for 5 seconds, or by unplugging the cable plug from the Connect and plugging it back in after a few seconds.
Q: What should I do if a software update fails?
If a software update fails due to interrupted connections or power loss, the system automatically falls back to the previously installed software version. A new attempt is usually made automatically the next day.
Q: Can the Connect be installed on boats?
No, installation on boats or other water vessels is strictly prohibited and not permitted.