Truma Mover SR Version 2
Official technical documentation and workshop diagnostics for Mover SR.
Technical Specifications
Operating Voltage12 V DC
Power ConsumptionApprox. 20 A on average, Maximum 120 A
Master Troubleshooting & Diagnostics Matrix
| Error Code / Indicator | Symptom / Meaning | Step-by-Step DIY Fix | Suggested Actions |
|---|---|---|---|
N/A | LED "off" and no audio signal Possible Cause: System is switched off or remote control batteries are discharged or missing. | Check the batteries in the remote control and replace if necessary. | DIY Safe |
N/A | LED "flashing" for approx. 10 seconds after switching on, then switches off again Possible Cause: Unable to establish radio link to the control unit. | Check that the control unit is powered and perform a reset by disconnecting the battery briefly for approximately 10 seconds. If the issue remains unresolved, contact an authorised service agent. | DIY Check / Tech Fallback |
N/A | LED flashing every 3 seconds Possible Cause: Caravan battery charge is weak. | Finish manoeuvring as quickly as possible and charge the battery. | DIY Safe |
N/A | LED flashing 5 times a second (5 Hz) Possible Cause: Caravan battery voltage is low (below approximately 11 V). | The movement function is locked until battery voltage returns to more than approximately 11 V as a result of recovery or charging of the battery. | DIY Safe |
N/A | LED flashing approximately 2 times a second (2 Hz) Possible Cause: Overvoltage or overtemperature condition. | Switch the remote control off and on again. In the case of overtemperature, wait for the end of the cooling-off phase. | DIY Safe |