Truma S
Official technical documentation and workshop diagnostics for Mover S.
Technical Specifications
Operating Voltage12V DC
Power Consumption120 A max
Master Troubleshooting & Diagnostics Matrix
| Error Code / Indicator | Symptom / Meaning | Step-by-Step DIY Fix | Suggested Actions |
|---|---|---|---|
Operational Fault | System switches off automatically and cannot establish a radio link to the controller Possible Cause: Radio link failure between the remote handset and the control unit | Check the remote handset and control unit synchronization. If the issue remains unresolved, contact an authorised service agent. | DIY Check / Tech Fallback |
Operational Fault | Caravan battery has a low charge Possible Cause: Caravan battery state of charge is low | Finish manoeuvring as quickly as possible and charge the battery. | DIY Safe |
LED flashes continuously | No manoeuvring is possible due to battery undervoltage Possible Cause: Caravan battery voltage has dropped below 11 V | Restore battery voltage above 11 V by means of recovery or battery charging before attempting further manoeuvring. | DIY Safe |
Operational Fault | Overcurrent or overtemperature condition detected Possible Cause: System is overloaded or the motors have overheated | Switch the remote handset off and on again, waiting for the system to cool down in the event of overtemperature. If the fault persists, have repairs carried out by a specialist. | DIY Check / Tech Fallback |